Complete Kit

PIR camera with video and audio recorder built.
Easily concealed recording device that will allow you to shoot continuously or motion detection.
Connect the camera with his PIR to the recorder to start recording.
With a 960p HD recording quality, captures audio video are recorded on an SDHC card up to 32GB

Long Range

Designed to be independent as long as possible, this device was designed with a lithium battery 15000mA.
This allows the DVR to reach up to 375 days of autonomy in stand-by mode.
In continuous recording mode recording autonomy can reach up to 20 hours.

Human detection

The camera sensor 480 lines and a PIR detector sensitive. Expected to save the battery, the PIR can transmit the digital recorder to record if a human detection is seen by the sensor.

HD recorder

The recorder has various recording modes: motion detection mode, continuous mode, program mode.
Several videos can be configured resolutions: 720x576, 1024x768 or 1280x960 or 960p HD pixels at 30 fps.
All movies are timestamped. Video recordings are saved as. "ASF" read by all known media players (Windows Media Players, VLC, QuickTime).

OSD

The control interface has been simplified, to access the main settings (recording time, detection sensitivity) by switches located on the side of the recorder.
Then if you want more control, connect the recorder to the AV cable to your monitor, TV ... to display the setup menu. To access the menu, use the supplied IR remote.
To review a recording using the IR remote or menu by inserting the SDHC card into a card reader.